Witam mam dwa urządzenie Dimer Led kupione jakiś czas temu ale uruchomione dopiero teraz i mam problem ponieważ żadne urządzenie podczas instalacji nie przechodzi dalej niż to co wkleiłem. Widzę że link z którym urządzenie potrzebuje się połączyć jest nie aktywne. Czy ktoś pomoże rozwiązać ten problem
INFO ESPHome 2025.12.0
INFO Reading configuration /config/esphome/boneio-dr-8ch-03-32ffa4.yaml…
WARNING GPIO5 is a strapping PIN and should only be used for I/O with care.
Attaching external pullup/down resistors to strapping pins can cause unexpected failures.
See Frequently Asked Questions - ESPHome - Smart Home Made Simple
WARNING GPIO12 is a strapping PIN and should only be used for I/O with care.
Attaching external pullup/down resistors to strapping pins can cause unexpected failures.
See Frequently Asked Questions - ESPHome - Smart Home Made Simple
WARNING GPIO15 is a strapping PIN and should only be used for I/O with care.
Attaching external pullup/down resistors to strapping pins can cause unexpected failures.
See Frequently Asked Questions - ESPHome - Smart Home Made Simple
WARNING GPIO2 is a strapping PIN and should only be used for I/O with care.
Attaching external pullup/down resistors to strapping pins can cause unexpected failures.
See Frequently Asked Questions - ESPHome - Smart Home Made Simple
WARNING GPIO0 is a strapping PIN and should only be used for I/O with care.
Attaching external pullup/down resistors to strapping pins can cause unexpected failures.
See Frequently Asked Questions - ESPHome - Smart Home Made Simple
INFO Generating C++ source…
INFO Compiling app… Build path: /data/build/boneio-dr-4cct-03
Processing boneio-dr-4cct-03 (board: esp32dev; framework: espidf; platform: https://github.com/pioarduino/platform-espressif32/releases/download/55.03.31-2/platform-espressif32.zip)